Replacement coil springs made for the 170mm rear shocks used on Team Losi SUPER BAJA buggies. Supplied as a pair, these springs reference a 2.5mm coil length for fitment checks and tuning comparisons.
These parts are intended to alter spring preload and the initial suspension reaction when fitted to compatible rear shock assemblies. When changing springs, check overall installed length and seat position on the shock shaft, then adjust preload in small steps and test on the track to dial in damping and rebound balance.
Fitting notes: remove the shock cap and slide off the existing spring, fit the replacement spring making sure it seats correctly against the retainer and shaft, reassemble the shock, verify free shaft travel, and carry out progressive test runs after each preload adjustment.
Copyright © 2008-2026 rcjaz.ca All rights reserved