This two piece set supplies front shock springs specified for Team Losi SUPER BAJA front shocks with a 132mm overall length, listed as SB132F/SP. The coils measure 2.5mm as indicated in the part code and are intended as direct spare springs for the front shock assemblies on the SUPER BAJA.
Fitting is simple on standard shock builds: remove the cap and piston, withdraw the old spring, then slide in the replacement and ensure the spring seats correctly on the lower perch. Use the original preload collar setting as a baseline and alter in small steps to dial ride height and initial compliance.
Tuning notes: changing to these 2.5mm coils alters initial spring rate, affecting small bump response, turn-in feel and braking behaviour. Combine spring swaps with damper valving and preload changes to achieve balanced front-end performance for your driving conditions.
Practical tip: confirm your current shocks are 132mm and check internal spring diameter before buying. Always replace front springs as a matched pair to maintain even response across the axle.
Copyright © 2008-2026 rcjaz.ca All rights reserved