TEAM LOSI MINI-T 2.0 16T Hardened Steel Pinion LM016T by GPM  [LM016T]

TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T
Price:
CAD$6.77
Brand:
GPM
Model:
LM016T
GTIN:
4894538350067
Condition:
Brand New
1 Reviews
Write a review
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"
alt="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T" title="TEAM LOSI MINI-T 2.0 2WD Harden Steel 45# 16T Pinion Gear - 2pc set - GPM LM016T"

16T hardened pinion for Mini-T 2.0

The LM016T pinion is a direct replacement or spare for MINI-T 2.0 2WD rigs that call for a 16T motor pinion. Made from hardened 45# steel, it focuses on durability and consistent meshing for scale RC drivetrains.

Fit notes: the pinion has a 2mm central bore and a 0.5mm tooth pitch, so it mates with motors and spurs using the same dimensions. Use this gear where shaft size and pitch match to keep engagement smooth and gear ratios predictable.

Installation tips: clean the motor shaft and check for any runout before mounting, secure the pinion with the supplied 3x3 screw shaft, then set mesh by moving the motor until you get a light, even contact pattern. Recheck screw tightness after an initial low-throttle test to confirm stable operation.

Packing includes

  • Pinion gear - 1 pcs
  • 3x3 screw shaft - 1 pcs

Compatible Models

  • TEAM LOSI MINI-T 2.0 2WD

 

Product Reviews
1 Reviews
rating
I am very satisfied with their library of parts, I have at least one GPM piece in every RC car I own, wish they could include logo stickers so I can put them on my RC car bodies though. Only thing thats a bother is the shipping times but its not a big dea

What shaft diameter does LM016T accept?

It fits a 2mm motor shaft or any adapter that presents a 2mm seating diameter.

Will this pinion work with my spur gear?

Yes if your spur uses a 0.5mm tooth pitch. Matching pitch is essential for smooth engagement and long gear life.

How do I set the gear mesh correctly?

Adjust motor position until you get a light, even contact pattern, then tighten the screw and recheck under low throttle to confirm there is no binding.

Copyright © 2008-2026 rcjaz.ca All rights reserved