Team LOSI LMT 4WD Roller Carbon Fiber Chassis Side Panels LMT014F/R by GPM  [LMT014F/R]

TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R
Price:
CAD$67.54
Brand:
GPM
Model:
LMT014F/R
GTIN:
4894538352283
Condition:
Brand New
Write a review
alt="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R" title="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R"
alt="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R" title="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R"
alt="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R" title="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R"
alt="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R" title="TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER Carbon Fiber Front/Rear Chassis Side Panels - 18pc set - GPM LMT014F/R"

Carbon fibre side panels for LOSI LMT chassis

This GPM kit provides carbon fibre front and rear chassis side panels made specifically for the TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER platform. The panels replace the stock side pieces with lighter, stiffer carbon fibre and include stainless steel fasteners for a straightforward, bolt-on swap.

The parts act as scale protection for chassis rails, guarding against impacts and abrasion while keeping mounting points aligned during setup and tuning. Installation uses the supplied hardware and fits both sides of the roller chassis without the need for extra drilling or machining when mounted to the specified LMT roller.

Packing includes

  • Carbon fiber chassis side panels - 2pcs
  • Stainless Steel Round Head Screw 3x10 - 10pcs
  • 3MM lock nut - 6pcs

Original Name / Part No:

LOS241034

Specifications

  • Item: Front and rear carbon fibre chassis side panels set
  • Material: Carbon fibre panels with stainless steel hardware
  • Model Number: LMT014F/R
  • Compatibility: TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER

For builders restoring or upgrading an LMT roller, this GPM side panel set simplifies chassis maintenance and helps preserve consistent suspension and drivetrain geometry during tuning.

This item is compatible with

  • LOSI-1/8 LMT 4WD SOLID AXLE - LOS04022

Will these panels bolt onto a stock LOSI LMT roller without trimming?

Yes. The kit is produced to match the stock mounting points on the TEAM LOSI LMT 4WD SOLID AXLE MONSTER TRUCK ROLLER and includes the stainless steel screws and lock nuts for a direct installation.

What hand tools do I need to fit the panels?

A hex driver for the 3x10 round head screws and a small 3mm spanner for the lock nuts are all that is required; take care not to over-torque the screws against the carbon fibre.

How many parts come in the kit?

The pack contains 18 pieces in total: two carbon fibre side panels, ten stainless steel 3x10 round head screws, and six 3mm lock nuts as listed in the packing section.

Will swapping to carbon fibre change chassis setup?

Carbon fibre panels are typically lighter and stiffer than some stock plastics, so you may notice slight shifts in balance or flex; check ride height and suspension settings after fitting to confirm setup.

Copyright © 2008-2026 rcjaz.ca All rights reserved