TAMIYA XV-02 PRO 7075 Aluminium Steering Arms and Bridge XV2048 by GPM  [XV2048]

TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048
Price:
CAD$30.25
Brand:
GPM
Model:
XV2048
GTIN:
4894538378542
Condition:
Brand New
Write a review
alt="TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048" title="TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048"
alt="TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048" title="TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048"
alt="TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048" title="TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048"
alt="TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048" title="TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048"
alt="TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048" title="TAMIYA XV-02 Aluminium 7075 Steering Arms And Steering Bridge - GPM XV2048"

Precision 7075 aluminium steering upgrade

This aftermarket steering assembly is an RC-scale upgrade for the TAMIYA XV-02 PRO 1/10 4WD chassis. Machined from 7075 aluminium, the steering arms and bridge reduce component flex and improve how steering loads transmit to the servo and linkages. Bearings and mounting hardware are included and the fittings arrive pre-installed for a tidier fitment.

The components act as a tuning upgrade rather than changing steering geometry: firmer mounting points help hold toe and ackermann under load so steering feels more direct during cornering and quick throttle transitions. Installation replaces the stock plastic steering parts while typically reusing the original linkages; take care to torque fasteners for aluminium hardware and verify servo horn alignment after fitting.

Packing includes

  • Steering arms and steering bridge - 3pcs
  • Bearing 5x8x2.5 - 4pcs
  • Bearing 3x8x3 - 2pcs
  • Stainless steel shim 5x8x0.1 - 2pcs
  • Grade 12.9 black round head screws 3x10 - 2pcs
  • All fittings are installed on the goods - 1pcs

Compatible Models

  • TAMIYA-1/10 4WD XV-02 PRO CHASSIS-58707

Fit this aluminium steering set to reduce compliance in the linkage and to refine steering feedback for setup work, practice runs, and club track sessions on the XV-02 PRO.

Are bearings and screws supplied with the kit?

Yes, the listed bearings and grade 12.9 screws are included and the fittings come pre-installed on the parts for quicker assembly.

Will this fit my XV-02 PRO without modification?

These parts are designed for the TAMIYA XV-02 PRO 1/10 4WD chassis and should install as direct replacements for the stock plastic components.

Does this change steering geometry?

No, the kit maintains the original geometry. It reduces flex to produce a firmer, more predictable steering feel.

Any tips for installing aluminium steering parts?

Avoid over-tightening, check for binding in linkages, and confirm servo horn alignment. Use threadlocker where recommended for metal-to-metal joints.

Copyright © 2008-2026 rcjaz.ca All rights reserved