Tamiya TT02B Rear Adjustable Alloy Damper 95mm TT2B095R by GPM  [TT2B095R]

Adjustable rear damper for fine TT02B setup

This aftermarket rear spring damper is a direct-fit 1:10-scale upgrade for the Tamiya TT02B chassis. The unit uses an aluminum alloy body and a threaded collar to alter spring preload and static ride height without cutting or modifying the shock tower, and it is supplied as a matched pair sized for the rear axle to align with TT02B mounting points.

Fitting is simple for hobbyists familiar with basic shock work: remove the stock rear dampers, transfer or change springs as required, secure the alloy units to the lower eyelets and upper mounts, then check travel and droop. Typical tools are standard hex drivers and common shock pliers, and the adjustable collar enables quick trackside changes to rebound bias and ride height.

When tuning on track, concentrate on spring preload and damping balance rather than expecting progressive action. Small adjustments to the threaded collar change rear ride height and weight transfer under acceleration and corner exit. Match these rear dampers with appropriate front units and spring rates to keep handling predictable for club-level racing and weekend driving.

For owners running the TT02B chassis who want a metal-bodied, adjustable rear damper to tune ride height and rear behaviour, this 95mm set is a practical aftermarket option that fits TT02B mounts and supports step-by-step setup procedures.