TAMIYA TT-02B Front Aluminum Suspension Arms Upgrade - JR-TT2B04-GU by Jazrider  [JR-TT2B04-GU]

Tamiya TT-02B Aluminum Front Suspension Arms Set (Gun Metal)
Price:
CAD$17.30
Brand:
JAZRIDER
Model:
JR-TT2B04-GU
Condition:
Brand New
Write a review

Precision gun metal front arms for TT-02B

This RC-scale front suspension arms set is designed for the TAMIYA TT-02B chassis and is supplied as model JR-TT2B04-GU. The gun metal aluminum parts are intended as direct-replacement upgrades to the stock front arms, offering a firmer mounting point at the front of the car.

Compatibility targets the TT-02B front suspension geometry. Installation uses the original mounting locations and normally requires removing the stock arms and fitting the aluminum set in the same orientation, using the existing pins and screws from the chassis. Verify clearance around the steering link and servo paths during fit-up to avoid binding.

In tuning terms these aluminum arms increase front-end stiffness relative to plastic, shifting steering feel and suspension response. Expect altered feedback under cornering and braking; adjust toe, camber, and shock settings when testing at the track.

Will these fit my TT-02B without modification?

They are produced to match the TT-02B front suspension layout and are designed to replace the stock arms using the original mounting points. Minor trimming is rarely needed but check your chassis beforehand.

Are mounting pins and screws supplied?

The package usually does not include new hardware; plan to reuse the TT-02B's existing pins and screws unless the seller explicitly lists hardware.

Do aluminum arms change steering feel?

Yes. Aluminum raises front stiffness versus plastic, which alters steering feedback. Expect to fine-tune toe, camber, and shock settings to restore balance.

Copyright © 2008-2026 rcjaz.ca All rights reserved