Tamiya Thunder Shot/Thunder Dragon/Fire Dragon/Terra Scorcher Aluminum Rear Hub - JR-TFD03-LB by Jazrider  [JR-TFD03-LB]

Lightweight aluminum rear hub details

This JR-TFD03-LB aluminum rear hub from JAZRIDER is an RC-scale metal replacement designed for Tamiya Thunder Shot, Thunder Dragon, Fire Dragon, and Terra Scorcher buggies. The blue anodized finish provides a straight swap for standard plastic rear hubs where the mounting interfaces match.

As a machined metal hub, it gives a firmer wheel mounting point compared with stock plastic pieces, helping to keep alignment under load and supporting typical tuning steps that affect traction and wheel control. It is intended for hobbyist and track use only, not for any full-size vehicle applications.

Installation and tuning notes

• Confirm fitment: verify the hub matches the existing wheel hex and axle interface before installation.
• Use the original fasteners where possible to retain correct thread engagement and stack height.
• Check 走珠軸承 seating and axle clearance after installation to ensure free rotation without binding.
• When adjusting toe or camber, recheck wheel runout and hub tightness as metal parts change stiffness compared with plastic counterparts.
• Routine inspection is recommended after initial runs to confirm no loosening of mounting hardware.