TAMIYA T3-01 Rear Wheel Shaft Kit +2mm Track - T3023R/+2MM by GPM  [T3023R/+2MM]

TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM
Price:
CAD$27.48
Brand:
GPM
Model:
T3023R/+2MM
GTIN:
4894538306125
Condition:
Brand New
Write a review
alt="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM" title="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM" title="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM" title="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM" title="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM" title="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM" title="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM" title="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM" title="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM" title="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM"
alt="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM" title="TAMIYA T3-01 DANCING RIDER Aluminum Rear Wheel Shaft W. Hex Adapter (+2mm) - 8pc set - GPM T3023R/+2MM"

Aluminum rear axle upgrade for T3-01

This aftermarket set replaces the stock rear wheel shafts on the TAMIYA T3-01 DANCING RIDER scale chassis and is specified for transferring drive from the rear gearbox to the wheels. The components are supplied for RC-scale use and are described with clear technical notes for hobby maintenance and tuning.

Parts are supplied as an 8pcs set including two rear wheel shafts, two hex adapters, two M3.5x2x12 screw shafts, and two M4 stainless steel locknuts. The hex adapters provide a +2mm track offset to allow small handling and roll-center adjustments without cutting hubs or wheels.

Manufactured from aluminum 6061 T6 in a one-piece shaft layout, the set is intended to improve tensile strength while lowering weight compared with simple stamped-steel originals. The supplied screw shafts and stainless locknuts use straight gear threads to hold the wheel assembly securely during spirited running.

Specifications

  • Item: Rear wheel shaft set, 8pcs.
  • Material: Aluminum 6061 T6, stainless steel locknuts.
  • Model Number: T3023R/+2MM
  • Included Parts: 2 rear wheel shafts, 2 hex adapters, 2 M3.5x2x12 screw shafts, 2 M4 stainless steel locknuts.
  • Compatibility: TAMIYA T3-01 DANCING RIDER
  • Function: Transfer drive from rear gearbox to rear wheels, with +2mm track widening for tuning.

Use this set when replacing worn rear shafts or when a modest track-width change is needed for handling adjustments on the T3-01 DANCING RIDER chassis.

Will these shafts install without modification?

They are listed for TAMIYA T3-01 DANCING RIDER compatibility and are designed to replace the stock rear shafts and associated hardware with a direct fit in most standard builds.

What tools do I need to fit the set?

Basic hand tools are sufficient: a suitable hex driver for the screws and a small spanner or socket for the M4 stainless locknuts. No specialist tooling is required.

What materials are used in the parts?

The shafts and hex adapters are aluminium 6061 T6 while the locknuts are stainless steel, matching the listed specifications.

How does the +2mm offset affect handling?

The +2mm hex adapters widen track width slightly to alter cornering balance and reduce inside tyre scrub without requiring hub or wheel machining.

Copyright © 2008-2026 rcjaz.ca All rights reserved