Tamiya MF01X Front Aluminium C-Hub Upgrade - MF019 by GPM  [MF019]

Tamiya MF01X Aluminium Front C-Hub - 1pr set - GPM MF019
Price:
CAD$26.10
Brand:
GPM
Model:
MF019
GTIN:
4894538161854
Condition:
Brand New
Write a review
alt="Tamiya MF01X Aluminium Front C-Hub - 1pr set - GPM MF019" title="Tamiya MF01X Aluminium Front C-Hub - 1pr set - GPM MF019"
alt="Tamiya MF01X Aluminium Front C-Hub - 1pr set - GPM MF019" title="Tamiya MF01X Aluminium Front C-Hub - 1pr set - GPM MF019"
alt="Tamiya MF01X Aluminium Front C-Hub - 1pr set - GPM MF019" title="Tamiya MF01X Aluminium Front C-Hub - 1pr set - GPM MF019"
alt="Tamiya MF01X Aluminium Front C-Hub - 1pr set - GPM MF019" title="Tamiya MF01X Aluminium Front C-Hub - 1pr set - GPM MF019"

Aluminium Front C-Hub for MF01X

This aluminium front C-hub is an aftermarket replacement made by GPM for the Tamiya MF01X chassis, supplied as a single pair set. It replaces the stock plastic hubs to offer a firmer mounting point for the front wheel carriers and steering linkages.

Choose this metal hub when you want consistent steering geometry under load or when tuning for tighter front-end settings. The component helps increase front steering stiffness and supports fine alignment changes during setup sessions.

Specifications

  • Item: Front C-Hub, 1pr set
  • Material: Aluminium
  • Model Number: MF019
  • Compatibility: Tamiya MF01X

For owners wanting a direct metal replacement for the MF01X front hubs, this GPM MF019 pair offers a scale-accurate option to stabilise steering and assist with setup work without changing the original chassis geometry beyond normal tuning adjustments.

Will MF019 fit the MF01X front hub mounts directly?

Yes, the MF019 is machined to match the MF01X front hub locations and is supplied as a 1pr set for both left and right sides.

Does switching to aluminium change steering feel?

Aluminium hubs increase stiffness at the steering pivot, which usually results in crisper steering response and more consistent geometry under cornering loads.

Any special hardware needed for installation?

The MF019 uses the same mounting points as the stock hubs; keep your existing screws and bearings unless you prefer stainless upgrades for longevity.

Will this affect caster or toe settings?

The part is designed as a direct replacement, so it does not change designed caster or toe unless you intentionally alter shims or link lengths during setup.

Copyright © 2008-2026 rcjaz.ca All rights reserved