Tamiya M03M Rear Aluminium Hub Carrier 0 Degree - M03M-12/0/LB by 3Racing  [M03M-12/0/LB]

Light blue aluminium rear hub carrier for M03M

This aluminium rear hub carrier is made to fit the Tamiya M03M chassis and is supplied as part M03M-12/0/LB. The unit features a light blue finish and serves as an RC-scale replacement or hop-up to mount the rear hub and suspension components on M03M models. The 0 degree option preserves the stock rear hub geometry while upgrading the carrier material for longer service life.

Purpose and tuning role: this carrier replaces the original plastic hub to provide a firmer mounting point for the wheel hub and rear links, improving alignment stability under load. As a 0 degree item it retains the factory toe and camber settings, making it a straight durability upgrade rather than a handling change part.

Installation notes: fitment requires disassembly of the rear suspension to remove the stock carrier and transfer the wheel hub, bearings, and linkage hardware into the aluminium unit. Reuse the original screws and bearings where suitable, check clearances before final assembly, and confirm bearing orientation and preload during installation. This component is intended for model use only.