Tamiya M03L/M04M/FF02 Front C Hub Aluminium M04M-08/LB by 3Racing  [M04M-08/LB]

Light blue anodised aluminium C hub for TAMIYA M03L, M04M and FF02

A machined aluminium front C hub finished in light blue anodise and catalogued as M04M-08/LB. Suited to TAMIYA M03L, M04M and FF02 chassis where a metal C hub is chosen for front steering assemblies.

This component serves as the steering knuckle on the front suspension, forming the pivot for wheel steering and linking to the steering linkage and舵機. The aluminium construction improves dimensional stability and wear resistance versus stock polymer hubs while keeping the standard steering location on compatible TAMIYA frames.

Fitting is straightforward: remove the factory front C hub, transfer any pins or bushings if required, install the aluminium hub and confirm free steering movement and wheel alignment. Check steering linkage clearance and make toe or camber adjustments during reassembly as needed.

For setup and testing, the hub is useful when assessing front-end stiffness, steering feel and durability under repeated runs; it works with shocks, suspension arms and steering parts to affect handling. Inspect bearing seats and pin contact areas after initial use to monitor wear.