Tamiya F104 Front Suspension Upgrade Kit - F104-17 by 3Racing  [F104-17]

F104 Front Suspension Upgrade for Tamiya

This front suspension set is a hop-up assembly intended for use on the Tamiya F104 chassis and is supplied as part number F104-17. The description focuses on compatibility, installation guidance, and how the component integrates into front-end setup without asserting unverified material or dimensional specifics.

Fitment notes: the assembly is designed to match the standard Tamiya F104 front mounting points and steering link geometry. When swapping the stock front parts, check that steering knuckles, hubs, and any bearings or rods you plan to reuse align with the F104 layout before final assembly.

Installation guidance: the set mounts to the F104 front bulkhead and ties into the existing steering linkage; remove the original front components and transfer serviceable items such as turnbuckles or bearings as required. Refer to the chassis manual for recommended torque and alignment to avoid over-tightening and to preserve intended motion at the front end.

Setup and tuning: use this front suspension set as a modular element when altering steering geometry and suspension response. It supports front-end adjustments during changes to shock length, spring rates, or anti-roll bar settings on a 1/10 on-road F104 platform and will influence turn-in, mid-corner balance, and weight transfer across the front axle.