Machined from 6061-T6 alloy, this oil-filled rear shock set is an aftermarket replacement built for TAMIYA DT-04 RC FIGHTER NXGEN rear suspension. The sealed oil design helps lower internal friction and control rear load transfer for more consistent balance in corners and under acceleration.
Mechanical highlights supplied with the kit include a 95mm centre-to-centre length, a beefier 3.5mm shock shaft, and both black and silver spring options to alter spring rate. Damping uses 500cSt silicone oil and the shock pin is hardened to resist wear, making these units suitable for hobby-level tuning focused on predictable rear damping and reduced stiction.
Installation notes: the shocks install in the DT-04 rear shock positions and replace the stock rear units when paired with compatible mounts and hardware. The kit ships with the screws and springs needed for the supplied shock bodies, and external preload and end-stop adjustments let you fine tune ride height and initial spring rate.
For DT-04 owners wanting firmer rear control, this aluminium, oil-filled rear shock set gives a straightforward upgrade path to dial damping and spring rate without modifying the chassis.
Copyright © 2008-2026 rcjaz.ca All rights reserved