TAMIYA CC-02 Front Upper Suspension Link Arms - JR-CC207-LB by Jazrider  [JR-CC207-LB]

Tamiya CC-02 Chassis Aluminum Front Upper Suspension Link Arms (Blue)
Price:
CAD$12.20
Brand:
JAZRIDER
Model:
JR-CC207-LB
Condition:
Brand New
Available in shop
Write a review

Fitment and installation for CC-02 front upper links

This RC-scale front upper suspension link arm set is made for the TAMIYA CC-02 chassis and carries the model number JR-CC207-LB. The parts are machined from aluminum and finished in blue anodize to provide a metal option for the CC-02 front upper linkage positions.

These arms locate the upper pivot of the front suspension and affect static camber and roll-center behavior when used with the stock steering and suspension components. Swapping to aluminum arms creates a consistent metal mount that helps when adjusting linkage angles or replacing worn plastic pieces.

Install the arms at the CC-02 front upper mounting points using the chassis original link pivots and fasteners. During test assembly, confirm clearance around steering knuckles and shock towers and make small adjustments to adjacent links if needed before final tightening.

Note: this accessory is intended for TAMIYA CC-02 scale models for suspension setup and routine maintenance.

Do these arms bolt into the stock CC-02 upper mounts?

Yes. These are designed to mount at the CC-02 front upper link points and typically use the existing pivot hardware on the chassis.

Will I need to swap any small parts or bearings?

Most installations reuse the original small fasteners and pivots, but inspect the link pins and replace any worn bushings to ensure proper movement before tightening.

Any tips for avoiding binding during install?

Assemble links loosely at first, cycle the steering and suspension through full travel, then adjust alignment and torque hardware incrementally to prevent binding.

Copyright © 2008-2026 rcjaz.ca All rights reserved