TAMIYA CC-02 Front Lower Suspension Link Arms CNC Aluminum - JR-CC209-LB by Jazrider  [JR-CC209-LB]

CNC aluminum lower links for TAMIYA CC-02

This is an RC-scale front lower suspension link arm set made for the TAMIYA CC-02 chassis, offered as model JR-CC209-LB. The parts are crafted from aluminum and serve as direct replacements for the CC-02 front lower linkage, intended to increase structural stiffness and long-term durability compared with standard plastic links.

Functionally, these link arms sit between the front axle mounts and the lower suspension geometry, so their stiffness and material properties influence steering feedback, weight transfer and suspension response. Replacing stock links with aluminum units is often used to reduce flex under load and to achieve a more consistent steering feel when tuning handling.

Installation notes: fit the arms to the CC-02's existing front lower link mounting points, verify hole alignment and check clearance with surrounding suspension components before final torque. Use the model's original screws or equivalent hardware that match the thread and length; apply thread locker where appropriate for long-term reliability. No additional tools or parts are included or implied.

Practical tuning advice: pair aluminum lower links with appropriate shock valving and spring rates to balance the increased front-end rigidity, and re-check toe and camber after installation since link stiffness can change suspension geometry under load.