TAMIYA CC01 Spur and Pinion Set 59T with 13T & 16T - CC100MG by GPM  [CC100MG]

Overview and intended use

This CC100MG gear set fits the TAMIYA CC01 platform and lists a 59-tooth spur together with 13T and 16T pinion choices to let hobbyists change final drive ratio without guessing tooth counts. The description stays focused on fitment, ratio choices, and practical setup notes.

The set replaces the primary spur and provides two pinion tooth options so you can tune acceleration or top speed within the CC01 gearbox envelope. Select the 13T or 16T pinion to match your motor and ESC combination for the torque or top-end speed you want.

Installation tips: check gear mesh against your existing motor mount and gearbox spacing, secure the pinion to the motor shaft per your motor maker's instructions, and spin the drivetrain by hand to confirm smooth engagement before completing assembly. Correct any binding or excess backlash by small shims or slight motor repositioning.

If you need the 59T spur with the listed 13T and 16T pinion options for a CC01 drivetrain, this kit gives the tooth-count choices to alter drive ratio; always verify fitment and set a correct gear mesh before running the model.