TAMIYA BBX BB-01 Front 70mm 7075 Aluminum Adjustable Spring Damper - BBX070F by GPM  [BBX070F]

TAMIYA BBX BB-01 Aluminum 7075 Front Adjustable Spring Damper 70mm - GPM BBX070F
Price:
CAD$33.01
Brand:
GPM
Model:
BBX070F
GTIN:
4894538380798
Condition:
Brand New
Write a review
alt="TAMIYA BBX BB-01 Aluminum 7075 Front Adjustable Spring Damper 70mm - GPM BBX070F" title="TAMIYA BBX BB-01 Aluminum 7075 Front Adjustable Spring Damper 70mm - GPM BBX070F"
alt="TAMIYA BBX BB-01 Aluminum 7075 Front Adjustable Spring Damper 70mm - GPM BBX070F" title="TAMIYA BBX BB-01 Aluminum 7075 Front Adjustable Spring Damper 70mm - GPM BBX070F"
alt="TAMIYA BBX BB-01 Aluminum 7075 Front Adjustable Spring Damper 70mm - GPM BBX070F" title="TAMIYA BBX BB-01 Aluminum 7075 Front Adjustable Spring Damper 70mm - GPM BBX070F"

Adjustable front spring damper for BB-01 tuning

This front spring damper is made to fit the TAMIYA BBX BB-01 chassis as an aftermarket upgrade. The body is formed from 7075 aluminum and the unit offers an adjustable spring arrangement for fine-tuning front suspension on 1/10 BBX models.

The internal assembly is designed to reduce friction and soak up impacts so the model stays composed during driving. Spring preload is changed at the top retainer to vary preload and perceived spring rate. This component is intended for the front damper location only.

Note on supplied springs: the black spring matches the original spring wire diameter, while the silver spring is 0.1mm thicker and gives a firmer setup when fitted.

Packing includes

  • Front damper - 2pcs
  • Silver spring - 2pcs

Original Name / Part No:

54504

Compatible Models

  • TAMIYA-1/10 BBX BB-01 CHASSIS-58719

Use these dampers to dial in front-end stiffness and balance on BBX BB-01 1/10 cars, swapping springs to suit surface grip or driving style.

Which BB-01 models are compatible?

This damper fits the listed TAMIYA 1/10 BBX BB-01 chassis indicated in the compatibility box. Check your chassis part code before ordering.

Are the dampers pre-assembled?

Dampers arrive assembled with springs fitted; you can change preload using the top retainer and swap to the included silver springs if a stiffer response is required.

Do I need special tools to fit them?

Basic hobby tools are sufficient: small hex drivers and pliers. Ensure correct mounting orientation and secure fittings to avoid binding.

How do I choose between the supplied springs?

Start with the black spring for stock feel; fit the silver spring for a 0.1mm thicker wire option to increase front stiffness on higher-grip surfaces.

Copyright © 2008-2026 rcjaz.ca All rights reserved