Tamiya 49465 TT White Short Spring Kit for GB01 and GT-01  [49465]

Tamiya 49465 - RC TT Setting Spring Set - White/Short - For GB01, GT-01, TT-Gear
Price:
CAD$18.92
Brand:
Tamiya
Model:
49465
Condition:
Brand New
Write a review

Fine Tune Suspension with Tamiya 49465 Springs

The Tamiya 49465 RC TT Setting Spring Set is a compact upgrade for hobbyists who want more control over their TamTech-Gear ride. The pack contains eight springs, four stiffer and four softer, made to suit the GB01 and GT-01 chassis. Use these to dial in damping and ride height for different surfaces or driving styles.

Fitment and Application

These springs are cut and rated to work with Tamiya GB01 and GT-01 layouts, giving you straightforward options when setting up front and rear suspension. Swap springs to match smooth club tracks or rougher outdoor layouts to change handling balance quickly.

How Spring Choice Affects Performance

Hard springs increase roll resistance and high speed stability, while soft springs let the tyres track uneven ground for more traction. Swapping between the two types helps you tune understeer, oversteer and midcorner balance without changing other components.

The springs are intended for GB01 and GT-01 shock setups. They should fit standard TamTech-Gear style dampers that accept short white springs, but check your shock bore and retainer fitment before final installation.
Bring both sets to the track and test short practice runs. Start with the soft springs to assess traction, then try the hard springs if you need more stability at speed. Record ride height and handling notes for repeatable setup.
Yes, spring rate and shock oil viscosity work together. Pair the springs with appropriate oil weight to tune damping response; heavier oil can slow compression and rebound to complement stiffer springs.

Copyright © 2008-2026 rcjaz.ca All rights reserved