T9V TX Antenna Replacement - Futaba FUS91176  [FUS91176]

FUTABA TX ANTENNA FOR T9V D=8MM S91176 (W/O PACKING)
Price:
CAD$8.53
Brand:
Futaba
Model:
FUS91176
Condition:
Brand New
Write a review

Replacement TX Antenna for T9V Radios

This is an aftermarket replacement antenna compatible with the T9V transmitter platform, listed as Futaba FUS91176. It is intended for RC-scale transmitter use to replace a damaged or missing antenna and restore normal operation for hobby radio systems.

The part title includes the D=8mm marking to identify the element diameter as supplied. This item is for model radio transmitters only and should not be used on full-size equipment. Confirm fitment with the T9V connector and antenna housing before installation.

Installation notes: switch off and remove power before replacing the antenna, access the antenna base on the T9V as required, and install the replacement element with care to avoid stressing the connector. After fitting, carry out a range and failsafe check at low throttle in a safe area to confirm correct radio performance.

How can I confirm this fits my T9V radio before buying?

Check the connector type and the antenna mount on your T9V unit against the replacement. The listing name includes T9V and FUS91176, but a physical comparison is the safest way to verify compatibility.

What is the recommended procedure to swap the antenna on-field?

Power down the transmitter, remove any bezel or cover needed to access the antenna base, gently remove the old element and tighten the new one by hand. Finish with a short range check before normal use.

Does the product list the antenna material or only the 8mm diameter?

The listing specifies a D=8mm element diameter but does not include a detailed material spec; contact the supplier directly if the construction material is required for your application.

Copyright © 2008-2026 rcjaz.ca All rights reserved