Steering Block Pair for B-MAX4 III Front End Tuning - YOKB4-415S by Yokomo [YOKB4-415S]

Yokomo B4-415S - B-MAX4 III Steering Block (Left & Right)

Price:

CAD$13.35

Brand:

Yokomo

Model:

YOKB4-415S

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

Spares / Hop-ups - Yokomo - B-Max4

Replacement steering blocks for B-MAX4 III

Yokomo YOKB4-415S steering block pair is a direct replacement for the steering knuckles on the B-MAX4 III chassis, covering left and right sides to maintain front-end symmetry. Designed for RC touring use, the parts focus on the hub interface and suspension link connections.

Installation notes: remove the stock steering block one side at a time, keep original hardware and bearings where serviceable, and confirm wheel bearing preload and link alignment when refitting. These components sit in the steering assembly to control toe, caster and ackermann; mark left and right orientation and verify steering stops and servo horn clearance before final torque.

Tuning guidance: fitting new steering blocks can be part of stepwise front-end setup. Check static toe, test toe changes dynamically, alter steering link lengths for preferred ackermann, and inspect tie-rods and kingpins for play after a few sessions to maintain consistent steering feel.

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Do these replace the stock steering blocks on a B-MAX4 III directly?

Yes. Yokomo YOKB4-415S is intended to replace the left and right stock steering blocks on the B-MAX4 III without modification.

Will I need extra parts to install them?

No special parts are normally required; reuse the original bearings and fasteners if they are in good condition, otherwise replace worn items before assembly.