SRX8GTR EC GP Shim 3.5x10x0.5 for Gear Mesh Tuning - Serpent 110473  [SER110473]

Precision 3.5x10x0.5 Shim for SRX8GTR

This Serpent 110473 shim is a thin metal spacer measuring 3.5x10x0.5 mm, designed to fine-tune clearances on compatible models such as the SRX8GTR EC GP (SER600077). It is intended for incremental tuning where fractions of a millimetre affect gear engagement, bearing play, or component alignment.

Use this shim to tweak mesh and alignment rather than as a load-bearing repair. Common uses include correcting pinion-to-spur clearance, removing endplay on shafts or bearings, and adding small spacing under plates or linkages. Because the thickness is fixed at 0.5 mm, only stack shims when space allows and when deliberate incremental change is required.

Installation notes: ensure mating surfaces are clean and flat before insertion, seat the shim fully under the targeted component, confirm free rotation and correct engagement after fitting, and re-check fastener torque or retaining features after reassembly. Avoid bending the shim during handling to preserve consistent thickness and flatness.