SRX8GTR EC GP Internal Carbon Wishbone Bushing - Serpent 601407  [SER601407]

Carbon inner wishbone insert

This Serpent 601407 carbon wishbone bushing is an RC-scale internal insert for front and rear wishbones, designed to locate and guide the inner pivot without changing the outer linkage geometry. The carbon construction gives a light, low-deflection contact surface for the wishbone pin and helps keep suspension alignment consistent under load.

Fitment: fit this part where the original kit calls for an internal wishbone bushing; listed compatibility includes SRX8GTR EC GP (SER600077). Always confirm the part number matches your chassis before installing.

Installation and maintenance notes: press or seat the bushing into the wishbone bore until fully located, ensure smooth rotation on the wishbone pin, and inspect for abrasion after initial track use. Replace worn bushings to eliminate inner-pivot slop and to maintain correct toe and camber settings.

Tuning role: the insert controls pivot compliance and repeatability rather than spring rate. Stiffer carbon inserts sharpen steering response and predictability in turns, while softer, more compliant inserts allow subtle self-centering and greater forgiveness on rough surfaces.