SO series Aluminum Rear Hub Carrier L/R - SO-415RA by Yokomo  [SO-415RA]

Yokomo SO-415RA Aluminum Rear Hub Carrier L/R for SO series
Price:
CAD$61.04
Brand:
Yokomo
Model:
SO-415RA
GTIN:
639342228669
Condition:
Brand New
Write a review
alt="Yokomo SO-415RA Aluminum Rear Hub Carrier L/R for SO series" title="Yokomo SO-415RA Aluminum Rear Hub Carrier L/R for SO series"

Precision aluminum rear hub carrier for SO series

Made for 2WD off-road SO series models, this aluminum rear hub carrier replaces the standard resin unit to boost structural stiffness and deliver steadier handling.

On the track the stiffer aluminum carrier limits flex during sudden loads such as hard landings or aggressive acceleration, helping the chassis maintain line through jumps and tight turns. The carrier accepts the same height insert as the stock part, so roll center and skid angle adjustments remain available without altering mounting geometry.

Final machining improves fit accuracy, so it is advisable to fit new bearings when installing this hub carrier; pressing in worn bearings may complicate later removal. As an upgrade component it emphasizes predictable handling and tuning flexibility rather than cosmetic change.

Specifications

  • Item: Aluminum Rear Hub Carrier L/R
  • Material: Aluminum
  • Model Number: SO-415RA
  • Compatibility: SO series 2WD off-road, Universal, ROR-020, ROR-020RTR

Compatibility

  • SO series (2WD off-road)
  • Universal
  • ROR-020
  • ROR-020RTR

As an aluminum replacement for the stock resin carrier, this part is intended for drivers seeking firmer suspension feel and more consistent line holding; fit fresh bearings and recheck roll-center settings after installation to tune handling.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this fit directly onto my SO series chassis without modification?

Yes. The SO-415RA is manufactured to use the same mounting points and height insert as the original resin carrier, allowing direct replacement on SO series 2WD off-road models.

Do I need any special tools to press in bearings during install?

Basic bearing press tools or a vice with appropriate bushings are recommended because the machined bores are precise; using correct tools helps avoid bearing damage and ensures proper seating.

Should I replace the height insert when switching to this aluminum carrier?

You can reuse the same height insert to preserve your current roll center, but swapping inserts is also straightforward if you want to experiment with roll-center changes after upgrading to the aluminum carrier.

Any tips to avoid bearing removal problems later on?

Install new bearings during fitting and press them in squarely. If you must reuse bearings, try to avoid driving them in too deep and plan on using a bearing puller for removal to prevent damage to the precision machined bores.

Copyright © 2008-2026 rcjaz.ca All rights reserved