Schumacher Neon Main Chassis Graphite 2.25 Upgrade - O-SMCP04 by Factory Pro  [FP-O-SMCP04]

Price:
CAD$65.06
Brand:
Factory Pro
Model:
FP-O-SMCP04
Condition:
Brand New
Write a review

Neon 225mm main chassis replacement

This RC main chassis is produced for the Schumacher Neon platform as a standard 225mm wheelbase kit component. The graphite 2.25 main chassis is intended to replace or upgrade the factory Neon chassis and provides the core mounting area for motor, ESC, servo and suspension parts.

The layout is focused on a direct-fit main chassis section that preserves common Neon mounting points and gives racers a graphite 2.25 option to change chassis stiffness during tuning. The item is supplied as a single main chassis piece suitable for hobby-level repair and setup work.

Specifications

  • Item: Wheelbase main chassis
  • Material: Graphite 2.25
  • Model Number: O-SMCP04
  • Compatibility: Schumacher Neon, standard 225mm wheelbase

Use this main chassis when restoring or tuning a Schumacher Neon to the standard 225mm wheelbase so it matches existing Neon mounting hardware and drivetrain layout.

Does this fit Schumacher Neon 225mm layouts without modification?

This chassis is made for the Schumacher Neon 225mm layout and is designed as a direct-fit main chassis piece for that wheelbase. Minor verification of your existing screws is recommended before fitment.

How does graphite 2.25 change handling?

Graphite 2.25 raises chassis stiffness compared with common plastics, which can sharpen turn-in and alter suspension response; expect to adjust shock and ride-height settings when switching materials.

Will I need extra fasteners to install it?

Installation normally uses the Neon platform's existing mounting points and hardware. Check fasteners for wear and replace any damaged screws, but no proprietary parts are typically required.

Does this change servo or motor locations?

The chassis keeps standard Neon mounting positions for motor, ESC and servo so your current electronics layout should remain compatible without relocating components.

What maintenance is recommended for graphite parts?

Inspect mounting holes and edges for wear, clean grit with a soft brush after running, and avoid over-torquing screws to prevent stress on graphite sections.

Copyright © 2008-2026 rcjaz.ca All rights reserved