Schumacher Mi10/Mi9/Mi8 HGT Front split upper deck graphite 1.6 - O-SCP043S by Factory Pro  [FP-O-SCP043S]

Price:
CAD$17.19
Brand:
Factory Pro
Model:
FP-O-SCP043S
Condition:
Brand New
Write a review

Schumacher Mi10 front split upper deck overview

This aftermarket front split upper deck is designed specifically for Schumacher Mi10 family cars as a direct upgrade or replacement. Made in graphite 1.6, it is intended to alter front chassis stiffness and help with balance tuning without affecting drivetrain or electronics.

Fitment and use: the component locates on the front shock tower and aligns with the factory mounting positions used on Schumacher Mi10/Mi9/Mi8 HGT chassis variants. Installation normally uses the existing screw holes and stock hardware unless the chassis instructions recommend otherwise.

Tuning notes: swapping to a graphite 1.6 deck increases front-end rigidity, which can sharpen turn-in and shift mid-corner balance. Expect to make incremental suspension and anti-roll adjustments during setup to dial handling for different track surfaces.

Compatibility

  • Schumacher Mi10
  • Schumacher Mi9
  • Schumacher Mi8 HGT

Will this upper deck bolt onto the stock front tower without modification?

Yes. The part is produced to match the stock mounting points for the listed Schumacher chassis, so in most standard setups it installs as a direct bolt-on using the original screw positions.

Do I need different hardware to fit this graphite deck?

Generally no. Installation typically reuses the chassis hardware; common hex drivers for your existing screws are all that is required unless your specific build calls for alternate fasteners.

How should I adjust my setup after fitting the 1.6 graphite deck?

Expect increased front stiffness. Start with small changes to front damping and anti-roll settings, then test incremental adjustments to restore desired turn-in and mid-corner behavior.

Copyright © 2008-2026 rcjaz.ca All rights reserved