Schumacher Mi10 Rear Bulkhead Plate 1mm Graphite 3.0 - Factory Pro O-SCP046-2  [FP-O-SCP046-2]

Mi10 rear bulkhead: product summary

This Factory Pro aftermarket rear bulkhead plate is made for the Schumacher Mi10 chassis and is supplied as one pair. It is an RC-scale replacement hop-up designed to adjust rear chassis stiffness and support rear-end tuning without implying use on full-size vehicles. The part is identified by Factory Pro model O-SCP046-2 and uses Graphite 3.0 material at 1mm thickness as shown in the product name.

The component sits at the rear bulkhead area to influence torsional rigidity and rear suspension response. Fit this plate when you need small changes to rear balance or to replace a worn or damaged plate. Installation typically reuses the Mi10 rear assembly mounting points; check screw lengths and alignment during fitment to prevent binding.

Tuning notes: switching to a thinner or stiffer plate alters weight transfer and rear traction at the model level, so test incremental setups and record results. As with any graphite item, inspect for cracks after impact and during routine maintenance.