Schumacher Mi10 Front Bulkhead Plate 1mm Graphite for Front-End Tuning - O-SCP045-2 by Factory Pro  [FP-O-SCP045-2]

Schumacher Mi10 Front Bulkhead Upgrade

This Factory Pro aftermarket front bulkhead plate is produced for the Schumacher Mi10 chassis as an RC-scale accessory, supplied as a pair and finished in Graphite 3.0. It mounts at the front bulkhead position to tweak nose stiffness and mounting geometry while keeping the factory bulkhead layout.

Installation is straightforward for hobbyists familiar with Mi10 assemblies: remove the stock front bulkhead plate, verify alignment with the suspension mounts and steering linkages, then reuse original mounting hardware when practical. No special tools beyond a hex driver are usually required, and trimming of nearby plastic parts is unlikely.

From a setup viewpoint this 1mm graphite plate gives a modest increase in torsional rigidity at the nose, which alters steering response and front grip. Fit it as part of a stepwise tuning plan, combining changes with tyre selection, shock valving, and roll-center adjustments to measure handling differences.