Schumacher FT9 Rear-Right Graphite Hub Plate Replacement - Factory Pro O-SCP038R  [FP-O-SCP038R]

Price:
CAD$12.37
Brand:
Factory Pro
Model:
FP-O-SCP038R
Condition:
Brand New
Write a review

FT9 rear-right graphite hub plate

This Factory Pro O-SCP038R steering hub plate is an aftermarket replacement made for the Schumacher FT9 chassis, intended for the rear-right steering or suspension upright position. Manufactured in graphite as noted in the product name, it is shaped to integrate with the FT9 steering assembly without requiring changes to the chassis geometry.

Fit and installation notes: confirm alignment with the FT9 upright and bearing bores before final tightening, reuse the original hardware where appropriate, and recheck wheel toe and steering travel after fitting. The unit is supplied as 1 pcs and is intended to replace the stock right rear steering hub plate on the FT9 platform.

Tuning role: a graphite hub plate changes local stiffness compared with plastic parts, which can affect steering precision and rear axle feedback. Use this component when experimenting with small adjustments to rear steering rigidity or when replacing a damaged stock plate on the FT9.

Will this swap fit other Schumacher models?

This item is produced for the Schumacher FT9 chassis and fitment to other models is not guaranteed. Check the upright and bearing bore dimensions before attempting to use it on a different car.

What benefit does graphite provide over plastic?

Graphite offers higher local stiffness than typical plastic hubs, which can tighten steering feel and change the feedback at the rear axle without adding significant weight.

Any installation advice for the FT9?

Align the hub with the upright and bearings, torque bolts incrementally while checking steering geometry, and bench-test the steering throw before taking the car to the track.

Copyright © 2008-2026 rcjaz.ca All rights reserved