Schumacher FT9 Rear Right Steering Hub Plate +1mm Graphite - Factory Pro O-SCP041R  [FP-O-SCP041R]

Product Summary

This aftermarket steering hub plate is made specifically for the Schumacher FT9 and fits the rear right location with a +1mm steering offset. Machined from graphite and supplied as a single piece, it is intended for replacement or for dialing in rear steering on FT9 touring cars.

Purpose and tuning role: the +1mm plate moves the steering mount slightly to change rear steering response and balance; use it when testing handling tweaks or when replacing a worn hub plate. The part is for RC use only and matches the FT9 hub mounting interface.

Installation notes: remove the rear hub assembly and test-fit the new plate against the existing part, check bearing alignment and thread engagement, then refit using the original fasteners and the correct hex driver. Do not over-torque fasteners to avoid stressing suspension parts and confirm the hub and wheel rotate freely after installation.

• Position: Rear right (RR)
• Offset: +1mm to steering mount
• Material: Graphite
• Quantity: 1pc
• Designed for: Schumacher FT9 chassis