Scale Model Primer Spray for Metallic Finishes - Tamiya 69951  [69951]

Primer to prepare metallic topcoats

Tamiya 69951 is a surface primer spray formulated to prepare hobby scale models and Tamiya kits for metallic topcoats. It lays down a consistent base that improves paint adhesion and minimises mottling when using metallic colours, helping you get even coverage before final finishing.

Application notes: apply to clean, dust-free plastic or resin panels. Lightly abrade glossy areas with a fine abrasive (800-1200 grit) and remove any residue before spraying. Hold the can 20-30 cm from the part and apply several light, even passes rather than a single heavy coat to avoid runs and excessive texture.

Practical tips: trial the spray on a scrap panel to check pattern and drying pace. Allow short flash-off between passes (about 5-10 minutes depending on temperature) and follow label directions for full cure before applying metallic paint. Keep ambient temperature steady and avoid high humidity while spraying for best results.

Care and storage: the primer improves adhesion and surface uniformity but is not a polishing compound - allow full cure before wet-sanding or buffing the topcoat. Store the can upright in a cool, well ventilated place and follow normal hobby safety precautions when spraying.