Savox SH-0350 Micro Digital Servo - Aluminum Case  [SH-0350]

Savox SH-0350 Micro Digital Servo
Price:
CAD$30.07
Brand:
Savox
Model:
SH-0350
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Savox SH-0350 Micro Digital Servo" title="Savox SH-0350 Micro Digital Servo"

Savox SH-0350 Micro Servo for Accurate Flight Control

The Savox SH-0350 Micro Digital Servo is a compact, performance-focused unit made to sharpen control on smaller RC models. Its aluminum case helps dissipate heat while keeping the servo compact and reliable for regular hobby use.

Built for reliable operation

Using an over-spec design, the Savox SH-0350 delivers better-than-standard micro servo performance. It uses industrial grade plastic gears and a single ball bearing to ensure smooth movement. Suited to 250/450 class helicopters and park flyer airplanes, it maintains consistent torque and response across common voltages.

Specifications

  • Dimensions: 22.8x12.0x25.4 mm
  • Weight: 12.3 g
  • Speed (@4.8V): 0.21 sec/60°
  • Torque (@4.8V): 30.6 oz-in
  • Speed (@6.0V): 0.16 sec/60°
  • Torque (@6.0V): 36.1 oz-in
  • Gear Material: Industrial Plastic
  • Bearing: 1BB
  • Case Material: Aluminum
  • Running Current (No Load @4.8V): 150 mA
  • Running Current (No Load @6.0V): 180 mA
  • Stall Current (Locked @4.8V): 1000 mA
  • Stall Current (Locked @6.0V): 1200 mA
  • Idle Current: 5 mA
  • Limit Angle: 220° ± 10°
  • Connector Wire Gauge: #26 AWG
  • Connector Wire Length: 250 ± 5 mm
  • Horn Gear Spline: 21T
  • Control System: Pulse Width Modification
  • Amplifier Type: Digital Controller
  • Operating Travel: 44° (1500→2000 usec)
  • Neutral Position: 1500 usec
  • Dead Band Width: 5 usec
  • Rotating Direction: Clockwise (1500→2000 usec)
  • Pulse Width Range: 700→2300 usec
  • Maximum Travel: Approx 150° (700→2300 usec)

The Savox SH-0350 Micro Digital Servo is a dependable choice for pilots seeking tight, repeatable control on 250/450 helis and park flyer models.

What level of assembly skill is needed to fit the SH-0350?

Basic soldering is not required for installation; mounting involves standard servo screws and a compatible horn. Familiarity with aligning neutral positions helps get precise control quickly.

Which voltage range works best for this servo?

The SH-0350 performs well across common hobby voltages. You can run it at 4.8V for lower heat and at 6.0V for faster response and higher torque, observing your system limits.

Any tips for mounting in a 450 heli tail?

Use vibration-damping mounts where possible, keep leads tidy to avoid interference, and verify horn alignment at neutral to prevent binding during full travel.

Copyright © 2008-2026 rcjaz.ca All rights reserved