RC Shock Oil #27.5 Silicone Damping Fluid - Yokomo YOKRP-085275  [YOKRP-085275]

Yokomo RP-085275 - Ultra Shock Oils #27.5 Racing Performer
Price:
CAD$14.47
Brand:
Yokomo
Model:
YOKRP-085275
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

RC silicone shock oil for precise damping

This Yokomo YOKRP-085275 Ultra Shock Oil is a silicone damping fluid formulated for use in RC shock absorbers to assist with damping adjustments. It serves as a replacement or tuning fluid where a stable silicone base oil is required, and it is intended only for model car suspension assemblies.

Role in tuning: shock oil moderates damping speed by resisting piston travel inside the shock body. Selecting heavier or lighter oil changes traction, response in cornering, weight transfer behavior, and rebound characteristics. Use this product as part of stepwise tuning, swapping oil to observe handling changes while keeping other setup variables constant.

Installation notes: drain the old oil, check seals and shock shafts for wear, then refill slowly to reduce trapped air. Cycle the shock to expel bubbles and top up as needed. Use syringes or shock pumps made for RC shock maintenance to prevent contamination and overfilling.

Handling and storage: keep caps secured, store upright at room temperature away from direct sunlight, and avoid mixing with other oil types. Dispose of used oil following local rules for chemical fluids.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.
It is designed for shock absorbers specified to use silicone oil. Refer to your shock or vehicle manual to confirm recommended fluids before use.
Fully compress and extend the shock several times, tap the shock body to coax out trapped air, then top up oil until no bubbles appear during compression.
Mixing different silicone formulations is not advised because it can unpredictably alter viscosity and performance.

Copyright © 2008-2026 rcjaz.ca All rights reserved