RC Ball Driver 2.5 x 110mm for Precise Reach - Arrowmax am-429125  [am-429125]

2.5 x 110mm Ball Driver Overview

This limited edition Arrowmax ball driver am-429125 is an RC-scale hex tool engineered to reach recessed or angled hex screws while maintaining firm engagement on 2.5mm hex heads. The ball driver profile allows the tip to enter screws at small angles without cam-out, which helps when chassis or bodywork restrict access.

For tuning and routine maintenance the driver is ideal for setting shock caps, adjusting linkage ball ends and working on tight-clearance hex screws where a straight driver cannot stay aligned. The 110mm shaft length provides extra reach into deeper assemblies and the 2.5mm tip suits common fasteners used on 1/10 and similar class models.

Work method: seat the ball tip fully into the hex recess, apply steady axial pressure and use the slight angular movement to align the driver with the screw, then turn with controlled torque. Finish with short, precise turns to avoid stripping threads in plastic hubs or lightweight suspension parts.

Care: keep the tip free of grit and check for wear before precision setup sessions; replace the tool if the tip becomes rounded to retain secure engagement with small hex heads during tuning and race-day repairs.