O.S. Engine OS40601100 Cam Cover for FS-62V Engines  [OS40601100]

Replacement cam cover for FS-62V engines

This cam cover is an RC-scale replacement part labeled OS40601100 by O.S. Engine and specified for the FS-62V family. It fits over the cam area of compatible FS-series model engines and is intended for routine maintenance and part replacement on nitro-style RC power units.

Compatibility depends on the FS-62V model code shown in the product name; check your engine identification before ordering. Typical uses include swapping a worn cover during a rebuild, checking the cam area for wear, or restoring a proper seal after replacing the gasket.

Installation guidance: remove the old cover and clean mating surfaces of debris or damage, fit the appropriate gasket or O-ring from your engine service kit if required, align the cover on the cam housing, and tighten the fasteners evenly for correct seating. After fitting, perform a short run and inspect for oil or fuel seepage before full operation.

Tuning and maintenance role: while the cover does not change engine output, a correctly fitted cam cover preserves sealing and alignment of the valve train area, supporting consistent engine behavior during tuning and track use.