Mugen MRX-5 Brake Linkage Bracket Aluminium - Arrowmax AM-MRX5-H2302  [AM-MRX5-H2302]

MRX-5 Brake Bracket Overview

The Arrowmax AM-MRX5-H2302 brake bracket is an aluminium replacement part designed for the Mugen MRX-5 chassis family. It installs as a direct-fit mounting point for the brake linkage and integrates with the stock MRX-5 brake assembly without requiring chassis modification.

Fitting is simple for anyone familiar with MRX-5 layout: remove the original bracket, align the linkage pivot holes and refit using the factory fasteners. Use the correct hex driver to avoid stripped heads and check linkage movement through suspension travel to ensure there is no binding. This guidance assumes standard MRX-5 hardware is used, so avoid mixing incompatible fasteners.

The bracket gives a stable pivot for brake linkage geometry and allows small changes to lever arm length and mounting position. Moving the bracket alters engagement feel and pedal ratio as part of the RC tuning process, so make incremental adjustments and record settings for track or practice sessions. This part is intended for RC models only and is not for real-vehicle use.