Mr.Hobby MT604 High Adhesion Masking Tape 10mm x 18m - Precision RC Masking [GSI-MT604]

Mr.Hobby MT604 - Mr.Masking Tape High Adhesion 10mm x 18m

Price:

CAD$3.65

Brand:

Mr.Hobby

Model:

GSI-MT604

GTIN:

4973028929416

Condition:

Brand New

Quantity:

Available in shop

Write a review

Description
FAQ

Precision Masking for Sharp Paint Edges

When aiming for clean paint separation on scale RC bodies, the Mr.Hobby MT604 Masking Tape gives modelers a reliable option. Its strong tack keeps edges sealed while removing without leaving sticky residue, so panels stay neat after paintwork.

Top Features of Mr.Hobby MT604

Size: 10mm wide, 18m long
High Adhesion: Bonds well to common modelling surfaces to reduce paint seepage
Residue-Free: Lifts off cleanly to protect underlying finishes

Tips for Clean Masking

Apply tape to a dust-free, dry area and press the edge down firmly to block paint bleed. Work slowly around curves and re-press any sections that might lift before spraying multiple coats.

Will Mr.Hobby MT604 conform to rounded body panels?

Yes. The tape has enough flexibility for gentle curves on shells and small parts, but take care on tight radii and press it down in short sections for a snug fit.

What paint types work best with this tape?

It performs well with common model paints, including water-based acrylics and solvent-based enamels. Always test on a scrap piece if you are using unfamiliar chemistry.

How should I remove the tape after painting?

Remove slowly at a low angle once the paint is touch dry to avoid lifting. Pulling back along the surface gives the cleanest edge and reduces the chance of peeling.

Hot Brands