MP10 Suspension Pivot Bush Set (White) - Kyosho IF616WC  [KY-IF616WC]

Kyosho IF616WC - Color Sus. Bush Set (White/MP10)
Price:
CAD$17.73
Brand:
Kyosho
Model:
KY-IF616WC
GTIN:
4548565470167
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $14.90 each $5.68 or 16%
3+ $14.15 each $10.75 or 20%
Write a review

MP10 Suspension Pivot Bushes Overview

This Kyosho IF616WC RC accessory is a coloured suspension bush set made for MP10 chassis maintenance and fine tuning. The white parts help you identify replaced bushes during setup or simply match a preferred look.

Fit these bushes to swap out worn or missing suspension pivot bushes on MP10 models. They function as small interface pieces between linkage pins and suspension arms, reducing unwanted play and improving repeatability in suspension geometry when servicing shock and arm assemblies.

Installation is straightforward for hobbyists familiar with MP10 disassembly: gain access to the arm pivots, remove the old bushes, and press the replacements into the arm or pivot as required. After fitting, check the linkage moves freely without excessive binding or endplay.

Compatibility

  • MP10

This part is intended for 1: scale RC suspension maintenance and tuning on MP10 chassis, offering an easy replacement to restore pivot interface fit and support consistent setup checks.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I remove the old bushes on an MP10?

Access the suspension arm pivots and carefully press or tap the old bushes out. Use a small punch or an appropriate driver to avoid damaging surrounding plastic. Work slowly to keep pivot bores true.

Will the white colour affect fit or performance?

No. The white finish is cosmetic; fit and function remain determined by the bush dimensions. Confirm the parts seat flush and that the linkage retains expected free movement after installation.

Any tips for pressing the new bushes in place?

Support the arm on a flat surface and apply even pressure when seating the bush. A bench vise with soft jaws or a socket that matches the bush outer diameter helps prevent distortion.

Can I reuse old bushes if they look okay?

If the original bushes show no play, cracking, or deformation they can remain in service. Replace them whenever you detect looseness or inconsistent suspension feel to maintain repeatable setup.

Copyright © 2008-2026 rcjaz.ca All rights reserved