Mini-Z Overland Spare Alloy Rim wide 6h MOL1206S1/BW by GPM  [MOL1206S1/BW]

Kyosho Mini-Z Overland Alloy Rim Sinkage(6h)-1pc(Wide Spare Tire For Body) - GPM MOL1206S1/BW
Price:
CAD$10.12
Brand:
GPM
Model:
MOL1206S1/BW
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Scale alloy spare wheel for Mini-Z Overland bodies

This aluminium alloy rim is an aftermarket replacement made to suit Kyosho Mini-Z Overland spare mounts and the 6h hex interface. It is supplied as model MOL1206S1/BW and is intended as a wide spare tyre wheel for body-mounted use.

Fitment notes: confirm the spare carrier and the 6h hex fastener on your Mini-Z Overland before fitting. Typical installation replaces the body-mounted spare assembly and secures the alloy rim using the existing hex hardware or compatible fasteners that match the 6h bore.

On-vehicle effect: as a body-mounted spare rim it primarily changes rear visual weight and packing rather than suspension geometry, so check clearances with the body shell and any accessories to prevent rubbing or balance issues when carrying a wide spare tyre.

Will this rim mount to other Mini-Z spare brackets?

Check whether the other Mini-Z variant uses the same 6h hex and spare mount spacing. If the mount matches the 6h interface and width, the rim may fit with minor adjustments.

Do I need new screws to install it?

Most Mini-Z Overland spare mounts reuse the original hex fasteners, but verify that the fastener diameter and length suit the rim bore; replace with compatible 6h hardware if required.

How should I protect the alloy finish?

Handle the rim with care during installation and consider a clearcoat or corrosion inhibitor if the rim will see wet conditions to reduce scratching and oxidation on the alloy surface.

Copyright © 2008-2026 rcjaz.ca All rights reserved