Mini-Z Overland Alloy Rim Pair MOL0308K by GPM  [MOL0308K]

Aftermarket alloy wheel for Mini-Z Overland

The MOL0308K alloy wheel rim is an aftermarket replacement designed for Kyosho Mini-Z Overland models. It is presented as a scale accessory for the Mini-Z Overland platform and should be treated strictly as a model part.

The rim is supplied as a single pair and carries the 8h designation; installers should confirm fitment visually against the vehicle's wheel hub before final attachment. Standard wheel removal and reinstallation procedures for Mini-Z Overland chassis apply.

Installation notes: remove the original wheel assembly, inspect the hub and any spacers, fit the alloy rim onto the hub, and secure with the original fasteners. Use an appropriately sized hex driver to tighten fasteners progressively and check for axial and radial runout after mounting. Avoid over-torquing to prevent damage to wheel hexes or hub components.

Tuning considerations: switching to alloy rims alters wheel stiffness and the distribution of rotating mass at model scale, which can change steering feedback and suspension response on the Mini-Z Overland platform. Check wheel balance and clearance during setup and re-check trim after installation.