Mini-Z MR-02 Rear Rim 5-Spoke Two-Tone +2.0 Offset MR02-RP20/LB by 3Racing  [MR02-RP20/LB]

Aluminium rear wheel optimised for Kyosho Mini-Z

This MR02-RP20/LB aluminium rear rim is made for the Kyosho Mini-Z platforms listed in the title. It is an aftermarket wheel intended to replace standard plastic or alloy rims to modify tyre contact geometry and the car's visual stance without altering drivetrain parts.

The wheel features a five-spoke two-tone finish and a +2.0mm offset that shifts the tyre mounting face outward from the hub. On compatible Mini-Z MR-02 (MM/RM) and MR-015 models this affects rear stance and scrub radius. Because only offset and spoke style were supplied, confirm hub bore and tyre clearance on your chassis before final installation.

Installation notes: remove the stock rear rim per your Mini-Z service routine, check the hub bore and wheel hex seating for a snug fit, and reuse the original hex screw or wheel nut where applicable. After fitting, inspect wheel runout and tyre seating at slow speed to ensure there is no rubbing on the body or suspension bits.

Tuning role: a +2.0mm offset rear rim is typically used to widen the rear track slightly, which can change lateral grip balance and rear-end behaviour. Pair this wheel change with tyre compound, damper and differential tuning to reach predictable handling instead of relying on a single modification.