Mini-Z AWD Wide Rear BBS Alloy Rims 11mm 1.0mm Offset MZA009RW/+1.0 by GPM  [MZA009RW/+1.0]

Alloy BBS wide rear wheels for Mini-Z AWD

This rear rim set is a machined-style alloy BBS profile made for Mini-Z AWD scale racers, specified at 11mm rim width with a 1.0mm offset and supplied as one pair with the product label showing "10p".

Fit these rims to widen the rear stance on Mini-Z AWD and MR-03 AWD compatible cars to change rear track and tyre tuck for tighter cornering on indoor carpet or club tracks. The alloy construction holds shape better than stock plastic wheels, helping preserve tyre geometry under lateral loads at scale speeds.

Installation is straightforward on compatible Mini-Z AWD rear hubs: remove the stock rear wheels, confirm hex alignment and ride height, slip the BBS alloy rims onto your existing hex or adapter, and check body and suspension clearance. You may need light foam tyre trimming or careful tyre seating to prevent rubbing when switching to the wider profile.

From a setup perspective, a wider rear rim usually increases rear traction and shifts handling balance; try small changes to rear tyre compound or camber to refine understeer or oversteer on smooth indoor surfaces.