Mini-Z AWD Front Toe Linkage -2 degree AWD-10/-2 by 3Racing  [AWD-10/-2]

Front toe linkage for Mini-Z AWD -2 degree setting

This is an RC-scale front toe in/out linkage made for Kyosho Mini-Z AWD MR-03 compatible cars, listed as model AWD-10/-2. The component adjusts the front toe geometry to a -2 degree setting and can be used as a direct replacement or an upgrade for the stock linkage on MR-03 style AWD Mini-Z layouts.

Installation is a mechanical swap requiring removal of the current front linkage and secure attachment of the replacement to the same mounting points. Make sure the linkage ends articulate freely with the steering tie rods and confirm there is no binding through full lock. Use the original fasteners and common hobby tools to maintain correct alignment.

Tuning advice: shifting the front toe to a negative value increases initial turn-in and can reduce first-step understeer on tight tracks, while having an impact on straight-line stability. Make small changes, test on a familiar surface and record each adjustment so you can return to earlier settings if handling moves the wrong way.