Mini-Z AWD Alloy Ridge Front and Rear Rims 3.5mm Offset MZA501FR+3.5 by GPM  [MZA501FR+3.5]

Alloy front and rear ridge wheels for Mini-Z AWD

This fitment is an RC-scale wheel set made for Kyosho Mini-Z AWD models, supplied as front and rear ridge-style alloy rims with a 3.5mm offset and 8.5mm nominal width per wheel. The wheels are intended for use on MR-03 AWD platforms for hobbyist wheel tuning, stance adjustment, or to replace worn plastic wheels.

Installation notes: these rims mount to standard Mini-Z AWD wheel hubs and use the same wheel hex and retention methods as stock Kyosho parts. Use an appropriate hex driver for wheel installation, tighten hardware to secure the rim without over-torquing, and check tire seating and balance after assembly. They work with typical Mini-Z scale tires and foam inserts sized for MR-03 AWD wheel diameters.

Tuning impact: alloy rims change wheel mass and stiffness compared with plastic parts, affecting rotational inertia and the model-scale handling response. Fit them as part of stepwise setup changes when testing offset, track width, or tyre choices to refine on-track behaviour or appearance.