Mini Inferno Front Suspension Holder for Kyosho MIF-025/BU by 3Racing  [MIF-025/BU]

Front mount overview for Mini Inferno

This front suspension holder is an aftermarket replacement made to fit the Kyosho Mini Inferno chassis and carries the 3Racing MIF-025/BU model code. It provides a dedicated mounting point in the front suspension assembly for 1/18 scale Mini Inferno models intended for hobby use.

Fit and compatibility: this component is shaped for the Mini Inferno series, so confirm alignment with your chassis mounting holes and shock positions before final assembly. Do a visual check and a dry test fit to verify orientation and clearance around steering linkages and shocks.

Installation and setup notes: fit the holder using the original mounting pattern where possible, tighten fasteners evenly to avoid skew, and check that steering throw and suspension droop are not limited. Use the holder as part of routine camber and toe adjustments to stabilise the front geometry when tuning handling.

Tuning role: the holder fixes the front suspension interface so ride height, shock location, and wheel alignment can be repeated reliably during setup sessions on carpet or hard outdoor surfaces.