Mini 4WD wide front swing roller plate M4WD-50/SG by 3Racing  [M4WD-50/SG]

Tamiya Mini 4WD Sliver Carbon Wide Front Swing Roller Plate - 3RACING M4WD-50/SG
Price:
CAD$15.72
Brand:
3Racing
Model:
M4WD-50/SG
Condition:
Brand New
Write a review

Silver carbon wide front swing roller plate M4WD-50/SG for Mini 4WD

This is an aftermarket front swing roller plate made for Mini 4WD cars. The component carries a silver carbon finish and is shaped for wide front stay setups that require a swing-style roller mount. The notes below cover construction, fitment points, and routine handling for experienced builders and collectors.

The plate keeps a compact profile suited to front stay arrangements while maintaining the standard attachment points for swing rollers. The focus is on geometry compatibility with common Mini 4WD front stays, roller routing, and mounting stability rather than lap time gains or detailed tuning advice.

Installation tips for experienced hobbyists: confirm screw lengths and spacer choices when working with reinforced or layered stays. Make sure roller shafts and bearings seat freely through the swing travel without binding. For display or mixed display-use models, check the finish during assembly to avoid handling marks on the silver carbon surface.

Which wide front stays is this plate compatible with?

It is made for wide front stay patterns that accept swing-style roller mounts; measure hole spacing against your stay before final fitting.

Does the silver carbon indicate real carbon fiber?

The description notes a silver carbon finish; inspect the part on arrival to determine whether it is layered carbon or a visually matched composite.

What roller shaft sizes work with the swing mount?

Common front roller shafts are compatible, but check lateral clearance and spacer layout so rollers do not contact the stay or bodywork during swing motion.

Which fasteners and spacers are recommended?

Use screws and spacers sized to your front stay thickness; consider nylon spacers or threaded inserts to reduce stress on thin stays and keep the swing axis aligned.

How do I look after the silver carbon finish?

Clean gently with a soft cloth and mild detergent if needed, and avoid harsh solvents that can affect surface coatings; inspect mounting points for abrasion after test runs.

Copyright © 2008-2026 rcjaz.ca All rights reserved