Medius X26 Steel EP Antiroll Bar 1.2 X26 - Serpent 402194  [SER402194]

Antiroll bar purpose and specs

The Serpent SER402194 is an RC antiroll bar designated 1.2 X26 and listed for use with the Medius X26 steel EP kit (SER400052). It is a direct-fit sway bar intended to alter lateral roll stiffness between the chassis sides on electric scale cars.

The 1.2 X26 marking describes the bar's diameter and length profile, which indicates its relative stiffness compared with other bar choices. In setup work, changing to this bar adjusts how quickly load transfers from left to right during cornering; test one change at a time and compare behaviour before and after swaps.

Installation follows common sway bar practice: the bar locates in the chassis mounts and links to the suspension linkages, replacing or supplementing the existing component on the Medius X26 steel EP chassis. Confirm fit to the chassis mounts and linkage geometry before final tightening, and ensure free movement through full suspension travel. As with any steel part, inspect linkages and mounting points periodically for wear or loosening after runs.

This antiroll bar provides a simple mechanical tuning increment to adjust roll-stiffness balance on the Medius X26 steel EP chassis.