LOSI LMT 4WD Solid Axle Servo Steering Link, 7075-T6 Adjustable - LMT162 by GPM  [LMT162]

Aftermarket servo steering link for LOSI LMT platforms

This RC-scale replacement is built for LOSI LMT 4WD solid axle monster truck platforms and carries the model designation LMT162. Machined from 7075-T6 alloy, the link gives a hardened, dimensionally stable connection between the servo horn and the steering knuckles while matching the LMT-series mounting points and footprint.

Mechanical specs retained from the source include an adjustable center length from 100 to 113mm and a dual-direction spring-relief adjustment that sets a breakaway threshold. The spring tuning helps limit impact loads sent back to the servo, reducing the risk of gear damage, backlash or motor stall when the steering hits an obstruction.

Fitment is straightforward using the supplied fasteners and lock nut. Check your link length and horn alignment before final torque, set the neutral with your radio and servo horn, then tune spring pre-load to balance steering precision against stall protection. Increasing spring force tightens steering but raises stall load; reducing force gives safer disengagement on hard hits.

As an aftermarket steering link, this LMT162 unit emphasises durability and a tunable force-relief feature for LOSI LMT platforms; use the supplied hardware and confirm geometry during setup to match your steering feel and servo protection needs.