LAZER ZX7.5 Stabilizer Link Set LA416 for stabilizer repair - Kyosho  [KY-LA416]

Kyosho LA416 - Stabilizer Link Set (ZX7.5)
Price:
CAD$14.78
Brand:
Kyosho
Model:
KY-LA416
GTIN:
4548565524174
Condition:
Brand New
Write a review

Replacement stabilizer links for ZX7.5

This Kyosho LA416 stabilizer link set is an RC-scale replacement linkage made for use with the LAZER ZX7.5 model. The components are intended to restore the stabilizer function that influences roll control and steering feedback on the chassis.

Installation generally involves removing the worn stabilizer links and fitting the new set to the existing mounting points, using the original fasteners. The links transfer stabilizer forces between suspension members and allow tuning adjustments without changing the main suspension geometry.

After installation, inspect link attachment points and fasteners, and confirm that the linkage moves freely through full suspension travel before extended running. The item is supplied as an RC spare part and is not for full-size vehicle use.

Compatibility

  • LAZER ZX7.5
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What are the basic steps to replace the stabilizer links?

Remove the old links from their mounting points, position the new Kyosho LA416 links in place, and fasten using the original hardware. Check alignment and free movement before tightening fully.

Do I need any special tools to fit the LA416 links?

No specialist tools are required; standard RC tools such as hex drivers, open wrenches, and pliers are enough to remove and refit the stabilizer links.

Will replacing the links change steering feel right away?

Yes, installing new links can immediately affect roll coupling and steering feedback. Expect a noticeable change in how the chassis reacts to roll inputs, which can be fine tuned with stabilizer settings.

What post-install checks should I perform?

Verify fastener torque, confirm unobstructed linkage travel through the suspension range, and perform a short test run then recheck all connections.

Copyright © 2008-2026 rcjaz.ca All rights reserved