Kyosho Mini-Z Overland 32mm Alloy Damper Kit with Collars and Ball Screws MOL1332 by GPM  [MOL1332]

32mm alloy damper kit for Mini-Z Overland tuning

This scale RC damper is made for Kyosho Mini-Z Overland cars and is supplied as a 1pr set in an alloy finish. The kit includes collars, screws and ball screw hardware so you can replace the factory dampers or fit focused upgrades to your Mini-Z Overland suspension.

Fitment for experienced Mini-Z builders is straightforward: remove the stock dampers from the shock tower and lower mount, move any spring cups you need, then install the alloy damper using the supplied collars and screws. The nominal damper length is 32mm as shown in the title, so verify stroke and mounting geometry match your chassis before final assembly.

In setup and tuning, alloy dampers alter damping feel and increase robustness compared with stock plastic units. Use the collars to set preload and ride height, and lock the ball screws to reduce lateral play at the end caps. This component is intended for model-scale suspension tuning on track or off-road practice sessions where Mini-Z Overland setups are being refined.